4” EUROJET - multistage submersible pump

Materials

• pump and motor body, handle, cover and screen in stainless steel AISI 304

• impellers, diffusers and separator in inforced PPO

• each pump stage is flitted with a stainless steel ring for wear resistance

• the motor shaft is in stainless steel AISI 420
• the mechanical seal is aluminium Stainless Steel ring for wear resistance

• the motor shaft is in Stainless Steel AISI 420

• the mechanical seal is Alumina/Graphite, lubricated (silicone carbide seal available on request)

• a special lip seal is also fitted to the protect

Application

• particularly suited for irrigation, water boosting, and other water duties for both civil and industrial applications

Specification

• manufactured in Stainless Steel to the highest quality and standards, following extensive electrical and hydraulic tests

• the units work well even in low water levels

• they are easy to dismantle for repair and cleaning

• multi-stage electro-submersible pump with centrifugal radial impellers

• designed to handle clean water at a maximum temperature of 35 °C

• use depth up to 60 m under the water level (with adequate lenght of supply cord)

• vertical and horizontal working

• continous duty

• max immersion under the water level 17 m

• with 20 m cable (Rif. 60335 - 2 - 41)

• max. numbers of intervention 40/h

• max. content of sand 60 g/m

• cable lenght 1,5 -20 m. H07RN8F

• available without float switch (float switch up on request)

Motor datas

• asynchronous, single phase 230V 50 HZ or three phase, 400V-50HZ

• other voltages and frequencies on request

• insulation class F

• internal cooling is through a non-polluting mineral oil

• external cooling by pumped liquid

• built-in overload protection