MICROSTART/I float switch
Float switch for direct connection on pumps (only for neopren 3g1 version).
Float switch insensitive to humidity and condensation (patented)
Water resistant to 100 m depth with microswitch electric contacts / switch.
Use
level control only for the emptying or filling of tanks and cisterns.
it can be installed directly on the submerged pumps thanks to its small dimensions.
Features
water level regulator for clean water
the inner chamber is filled with polyurethane foam against humidity and water condensation
rated voltage max: 10 (4) a 250 V A.C.
microswitch electrical data: 20 (8) 250 V A.C. – 16 (4) a 250 V A.C. for the MICROSTART I 10a
IP: 68
max water temperature: 55° C
max working pressure: 10 bar
electrical contact: spst com + n.o (n.o. on request)
working angle: 30°
available cables: 3×1 PVC 3×1 neoprene
Description
technical characteristics
the MICROSTART I float switch is available in
two different version type 10 A and type 2 HP (20 A), and both consist of:
single outer casing piece in blow moulded polythene
inner chamber built as a single blow moulded piece for the switch and ball seat
microswitch interruptor
stainless steel ball
non-hygroscopic closed cells injection of expanded polyurethane in the regulator to eliminate air and to seal hermetically the unit
max. working pressure 10 bar.
change over version is available on request
