MICROSTART/I float switch

Float switch for direct connection on pumps (only for neopren 3g1 version).

Float switch insensitive to humidity and condensation (patented)

Water resistant to 100 m depth with microswitch electric contacts / switch.

Use

level control only for the emptying or filling of tanks and cisterns.

it can be installed directly on the submerged pumps thanks to its small dimensions.

Features

• water level regulator for clean water

• the inner chamber is filled with polyurethane foam against humidity and water condensation

• rated voltage max: 10 (4) a 250 V A.C.

• microswitch electrical data: 20 (8) 250 V A.C. – 16 (4) a 250 V A.C. for the MICROSTART I 10a

• IP: 68

• max water temperature: 55° C

• max working pressure: 10 bar

• electrical contact: spst com + n.o (n.o. on request)

• working angle: 30°

• available cables: 3×1 PVC 3×1 neoprene

Description

• technical characteristics

• the MICROSTART I float switch is available in

• two different version type 10 A and type 2 HP (20 A), and both consist of:

  • single outer casing piece in blow moulded polythene

  • inner chamber built as a single blow moulded piece for the switch and ball seat

  • microswitch interruptor

  • stainless steel ball

  • non-hygroscopic closed cells injection of expanded polyurethane in the regulator to eliminate air and to seal hermetically the unit

  • max. working pressure 10 bar.

  • change over version is available on request